Multitier Sieve Shake Laboratory Test Sieve Mechanical Shaker

• Type: Separating Plant
• Object: Powder or Granularity
• Separation Mode: Vibrating Separator
• Operating Type: Continuous Type
• Installation: Vertical
• Centrifuge Type: No
• Model NO.: SYS-200
• Distillation Equipment Type: No
• Extraction Tower Type: No
• Pressure: Low Pressure
• Condition: New
• Product Name: Test Vibrating Sieve
• Hertz: 50 or 60 Hz
• Voltage: 220V, 110V
• Diameter of Sieves: 200mm
• Port: Shanghai, Qingdao as Request
• Material of Wire Mesh: Stainless Steel 304
• Transport Package: Wooden Case
• Specification: 360*300*736mm
• Trademark: Hengyu
• Origin: China
• HS Code: 84741000
• Production Capacity: 300 Per Week

Product Description

Multitier Sieve Shake Laboratory Test Sieve Mechanical Shaker        
 

Sieving is an effective method for particle size measurement. It is commonly used for Quality Control in almost all industries such as chemicals, mining and metallurgy, food, cosmetics, pharmaceuticals and any laboratory involved in particle size analysis. The displayed test vibrating sieve is a good helper for particle size analysis.

Features of test vibrating sieve
1. Typically requires 50-150g of sample material
2. Setting time limits for 1 second -9999 seconds
3. Up to 9 fractions in one sieving operation
4. One person can pick up it
5. Approved ISO 9001:2008, CE and BV certificates
6. Accurate mesh size guarantees precise analysis of sample

Photo show main body and parts


Height and material


Layer suggest from 3-8 layer


Mesh size for reference


Please read the following information before usage of test vibrating sieve:

Before using

a.  Prior to operate the sieve shaker, ensure all the components are fastened, no broken on the sieves, no damage on the machine body, and the electrical cables are connected properly.
b.  Please check whether the machine model and specification are the same as your order.
c.  Power supply is the same as shown on the machine plaque. (Tolerance for voltage is +/- 10%)

Be using

a. Make sure the machine has been positioned horizontally
b. Check the power and make sure it is in line with the required, check grounding wire.
c. The machine body cannot contact with other things.
d. Must use the fixing nut to fix the sieves.

After using

a. Turn off the power
b. Clean the sieves after operation, place the machine in the right place 

How to operate for getting good analysis result?

Step 1	Weighing the tested material
Step 2	Place sieves with required mesh on the machine base sequentially
Step 3	Pour the tested material into the top of sieve
Step 4	The above step is OK, then cover with the lid and set the right time
Step 5	Power on
Step 6	It's time to set up, power off
Step 7	Remove the lid and sieves one by one from the top to bottom
Step 8	Summary: measure the weight of test material leaved on each sieve and bottom pan, and then gets their proportion and other related analysis result.

If you need one set of test vibrating sieve, please let's know the following requirements:
1. How many sieves you need at once
2. The mesh size of each sieves
3. Please suggest the voltage in your plant

Email us and get the best quotation.