Multi Layer Lab Sieve Shaker for Laboratory Particle Size Analysis

• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Vibration Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Mechanical Load
• Model NO.: SYS-200
• Loading Method: Static Load
• Display: Digital
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Voltage: 220V or 110V, 50 or 60Hz
• MOQ: Only One Set
• Port: Shanghai, Qingdao
• Layer: Upto 8 Layers
• Transport Package: Wooden Case
• Specification: 360*300*736mm
• Trademark: Hengyu
• Origin: Xinxiang, China
• HS Code: 84741000
• Production Capacity: 300 Sets Per Week

Product Description

Description of Multi Layer Lab Sieve Shaker for Laboratory Particle Size Analysis

  Sieving is an effective method for particle size measurement. It is commonly used for Quality Control in almost all industries such as chemicals, mining and metallurgy, food, cosmetics, pharmaceuticals and any laboratory involved in particle size analysis. The displayed model is a good helper for particle size analysis.

 The model enjoys the following advantages
1. Application: evaluation of size analysis
2. Typically requires 50-150g of sample material
3. Setting time limits for 1 second -9999 seconds
4. Up to 9 fractions in one sieving operation
5. One person can pick up it
6. Approved ISO 9001:2008, CE and BV certificates
7. Accurate mesh size guarantees precise analysis of sample

Photo show main body and parts


Height and material


Layer suggest from 3-8 layer


Mesh size for reference


Technical Parameters

Number	Name	Unit	Data
1	layers	layer	1-8
2	diameter	mm	200
3	granularity	mm	0.038-3
4	noise	dB	50
5	feed capacity(once)	g	200
6	amplitude	mm	5
7	voltage	v	220
8	speed	r/min	1400
9	power	KW	0.12
10	overall dimension	mm	360*300*736
11	weight	Kg	36

Please note that:

Before using

a.  Prior to operate the sieve shaker, ensure all the components are fastened, no broken on the sieves, no damage on the machine body, and the electrical cables are connected properly.
b.  Please check whether the machine model and specification are the same as your order.
c.  Power supply is the same as shown on the machine plaque. (Tolerance for voltage is +/- 10%)

Be using

a. Make sure the machine has been positioned horizontally
b. Check the power and make sure it is in line with the required, check grounding wire.
c. The machine body cannot contact with other things.
d. Must use the fixing nut to fix the sieves.

After using

a. Turn off the power
b. Clean the sieves after operation, place the machine in the right place 

How to use the model?
1. Place sieves with required mesh onto the machine base sequentially.
2. Pour sample in the top sieve, suggest less than 200g.
3. Lid down and clamp the fasteners, set the timer and start the shaker.
4. After the end of the set time, loosen the fasteners
5. Weight sample on each sieve to get the analysis result.

If you need Lab Sieve Shaker, please let's know the following requirements:
1. How many sieves you need at once
2. The mesh size of each sieves
3. Please suggest the voltage in your plant